Whole-house floor-standing battery
Home energy, designed to stand on its own.
A refined 16.07kWh floor-standing LiFePO4 battery for solar self-consumption, whole-house backup and off-grid energy systems.


Designed around real installations
A complete 16kWh cabinet. No rack required.
PowerHarp 16 places a 51.2V 314Ah LiFePO4 battery inside a compact indoor cabinet. Heavy-duty casters simplify positioning, while the integrated format keeps installation clean for utility rooms, garages and dedicated solar storage spaces.
Technology with purpose
Engineered for real homes and real loads.
150A continuous current
The battery supports 150A continuous charge and discharge, with a 200A peak for 25 seconds and up to 10.2kW peak output.
Smart BMS choices
Choose JKBMS JK200 or PCBMS PC200B configurations, both supported by 2A bidirectional active balancing for controlled cell management.
Connected monitoring
Depending on configuration, the system supports Gobel VRM, Home Assistant, ioBroker, Bluetooth and Wi-Fi-connected visibility.
Expandable whole-house storage
Parallel architecture supports up to 16 JK200 systems or 63 PC200B systems for projects that require more than one battery cabinet.

Ready for everyday energy
Quiet in the background. Ready when it matters.
Passive fanless cooling, integrated electrical protection and aerosol fire suppression make PowerHarp 16 a considered foundation for indoor whole-house battery backup.
Where it fits
A complete cabinet for whole-house energy planning.
PowerHarp 16 suits homeowners who prefer a floor-standing battery cabinet instead of a rack. It brings 16.07kWh of LiFePO4 storage, strong continuous output and integrated mobility into a format designed for utility rooms, garages and dedicated indoor energy spaces.
Buyer’s guide
How to plan a whole-house battery backup.
Whole-house does not mean every appliance must run during every outage. A professional design defines priority circuits, expected operating hours and high-starting-current loads, then matches both energy and power. PowerHarp 16 provides 16.07kWh nominal energy, 7.68kW continuous output and 10.2kW peak output.
Choose priority circuits
Decide whether the system should support essentials only or also larger loads such as pumps, HVAC or cooking equipment. This decision usually has more impact on battery and inverter size than the home’s floor area.
Calculate kWh and kW separately
Use appliance wattage and operating time to estimate energy. Then total the loads likely to run together and account for starting surges to check power.
Design the complete electrical path
Confirm inverter compatibility, transfer equipment, conductor size, circuit protection, earthing and local installation requirements. Battery capacity is only one part of a reliable backup system.
Technical details
The numbers behind the system.
Core specifications for system planning. Confirm inverter settings and final configuration with your installer before commissioning.
- Model
- GP-PB3-16K
- Chemistry
- Prismatic LiFePO4, 16S1P
- Voltage / capacity
- 51.2V / 314Ah
- Nominal energy
- 16.07kWh
- Continuous / peak current
- 150A / 200A for 25 seconds
- Continuous / peak output
- 7.68kW / 10.2kW
- Depth of discharge
- Up to 100%
- Cycle life
- 8,000+ cycles to 70% EOL
- BMS options
- JKBMS JK200 or PCBMS PC200B
- Parallel connection
- Up to 16 JK200 / 63 PC200B units
- Dimensions
- 850 × 480 × 280mm
- Environment
- IP21 indoor; fanless cooling
Solar battery knowledge
The essentials of whole-house solar battery design.
What does a 16kWh battery mean?
The 16.07kWh figure is nominal stored energy. It helps compare home battery systems, but usable backup time still depends on configured depth of discharge, inverter efficiency and the changing load of the home.
Why continuous and peak power both matter
Continuous power covers loads that remain on. Peak power addresses short surges from motors and other equipment. PowerHarp 16 is rated for 7.68kW continuous output and a 10.2kW peak, subject to the stated current and duration limits.
When parallel expansion is useful
A second battery can increase stored energy and system current capability when the overall design supports it. Plan expansion before installation so communication, protection, cable balance and physical clearances are ready for future cabinets.
A precise fit
A 16kWh whole-house battery with room to grow.
For homes evaluating a 16kWh whole-house battery backup, a floor-standing LiFePO4 solar battery or a 51.2V 314Ah energy storage cabinet, PowerHarp 16 offers a clean all-in-one battery format.
It is well suited to residential solar self-consumption, 48V inverter battery systems and off-grid home energy storage where strong continuous output and future parallel expansion matter.
Plan your system
Tell us what you want to power.
Share your inverter model, available space and target backup time. Our team can help you identify the right battery configuration.
Discuss your project