32kWh high-capacity energy storage
Whole-building energy.
Designed as one refined system.
PowerHarp 32 brings 32.15kWh of LiFePO4 storage and 15.36kW of continuous output into a floor-standing cabinet for larger homes and light-commercial projects.
High-capacity platform
Serious storage without moving to high voltage.
The 51.2V 628Ah architecture delivers substantial energy capacity on a familiar 48V-class platform. The floor-standing enclosure keeps the installation visually clean while concentrating more storage into one serviceable unit.
- 32.15kWh nominal energy
- 51.2V low-voltage architecture
- Floor-standing cabinet with integrated mobility

300A battery management
Protection designed for higher-power projects.
A 300A BMS supervises voltage, current and temperature while coordinating charge and discharge limits. Multi-level protection helps the battery respond to overvoltage, undervoltage, overcurrent, temperature and short-circuit conditions.
- 300A continuous BMS platform
- 15.36kW continuous charge and discharge capability
- Real-time monitoring of critical pack conditions

Long-service chemistry
Built for repeated solar cycling.
Prismatic LiFePO4 cells give PowerHarp 32 the stable chemistry and cycle capability expected from a modern stationary battery. The pack is rated for 8,000 or more cycles to the stated end-of-life condition.
- 314Ah prismatic LiFePO4 cells
- 8,000+ rated cycles to 70% end-of-life capacity
- Passive thermal design with no routine fan maintenance

Gobel VRM
Monitor the energy system from anywhere.
Connected monitoring gives owners and installers a clearer view of state of charge, cell data and operating status. Remote visibility supports faster diagnostics and better-informed system operation.
- Wi-Fi connected monitoring
- State-of-charge and battery status visibility
- Remote alerts and recorded operating data

Modular expansion
One cabinet today. A larger energy bank tomorrow.
Parallel operation lets a project grow beyond one battery as energy requirements change. Expansion should be designed with matching batteries, protection, busbars, cable sizing and inverter limits considered as one coordinated system.
- Up to 16 supported batteries in parallel
- Up to 514.4kWh of nominal storage at 16 units
- Suitable for larger residential and light-commercial planning

Where it fits
High-capacity storage for larger energy profiles.
PowerHarp 32 is designed for large homes, workshops and light-commercial sites that need substantial low-voltage storage in one cabinet. Its 32.15kWh nominal energy and 15.36kW continuous output reduce the number of enclosures required for a high-capacity residential energy storage system.
Buyer’s guide
When does a 32kWh battery make sense?
A 32kWh-class battery is most useful when measured energy demand, backup duration or solar production justifies the capacity. PowerHarp 32 should be sized against interval load data where possible, especially when large motors, workshops or multiple high-power circuits are involved.
Use real consumption data
Review utility interval data, inverter monitoring or a temporary energy meter. Identify both daily kWh and the highest periods of simultaneous demand instead of sizing from the monthly bill alone.
Separate critical and discretionary loads
Create an outage operating plan. Keeping every high-power load available can increase inverter, switchgear and conductor requirements even when the stored energy is sufficient.
Engineer the battery bank
PowerHarp 32 supports parallel expansion, but multi-cabinet systems require coordinated protection, busbars, cable lengths, BMS communication and commissioning. Engage a qualified system designer for the final architecture.
Technical details
The numbers behind the system.
Core specifications for system planning. Confirm inverter settings and final configuration with your installer before commissioning.
- Model
- GP-PB5-32K-JK300
- Chemistry
- Prismatic LiFePO4, 16S2P
- Voltage / capacity
- 51.2V / 628Ah
- Nominal energy
- 32.15kWh
- Continuous / peak current
- 300A / 400A for 25 seconds
- Continuous / peak output
- 15.36kW / 20.5kW
- Depth of discharge
- Up to 100%
- Cycle life
- 8,000+ cycles to 70% EOL
- BMS
- JKBMS JK300 with 2A active balancing
- Parallel connection
- Up to 16 units / 514.4kWh
- Dimensions
- 910 × 315 × 764mm
- Environment
- IP21 indoor; fanless cooling
Solar battery knowledge
A practical guide to large solar battery storage.
Why larger batteries need stronger system design
At 15.36kW continuous output and 300A continuous current, PowerHarp 32 can serve demanding projects. Those ratings also make conductor sizing, fault protection, isolation and thermal planning central design tasks.
Residential and commercial loads behave differently
A large home may have strong morning and evening peaks, while a small business may concentrate demand during operating hours. The same 32.15kWh battery can produce different value depending on load timing and available solar generation.
What modular expansion changes
Parallel batteries add energy capacity and can support a larger system, but they do not remove inverter or site limits. PowerHarp 32 supports up to 16 units; the final design must keep current sharing, communication and protection within approved limits.
A precise fit
32kWh storage for large homes and small businesses.
PowerHarp 32 answers searches for a 32kWh home energy storage battery, a 51.2V 628Ah LiFePO4 battery cabinet and a high-capacity whole-house backup system.
With 15.36kW continuous output and 16-unit parallel expansion, it also fits light-commercial solar battery storage, large off-grid systems and multi-cabinet 48V energy storage projects.
Plan your system
Tell us what you want to power.
Share your inverter model, available space and target backup time. Our team can help you identify the right battery configuration.
Discuss your project